专业从事离子液体的合成、应用及其相关技术的研究工作----Lanzhou Greenchem ILs/青岛奥立科

[1] A. Wang et al., “ionic liquid microemulsion‐mediated in situ thermosynthesis of poly(ionic liquid)s and their adsorption properties for Zn(II),” Polym. Eng. Sci., vol. 59, no. 5, pp. 1036–1042, May 2019.
[2] C. Jiao, H. Jiang, and X. Chen, “Properties of fire agent integrated with molecular sieve and tetrafluoroborate ionic liquid in thermoplastic polyurethane elastomer,” Polym. Adv. Technol., vol. 30, no. 8, pp. 2159–2167, Aug. 2019.
[3] H. Li, Y. Ma, Y. Cui, Z. Li, and H. Wang, “Ultralow Tribological Properties of Polymer Composites Containing [BMIm]PF 6 -Loaded Multilayer Wall Microcapsule,” Macromol. Mater. Eng., vol. 304, no. 4, pp. 1–9, 2019.
[4] C. Wang, A. Li, J. Xu, J. Wen, H. Zhang, and L. Zhang, “Preparation of WO3/CNT catalysts in presence of ionic liquid [C16mim]Cl and catalytic efficiency in oxidative desulfurization,” J. Chem. Technol. Biotechnol., vol. 94, no. 10, pp. 3403–3412, 2019.
[5] Z. Zhaoyu, H. Chunmiao, D. Chuanhu, X. Ping, and Z. Weiwei, “Efficient synthesis of cefadroxil in [Bmim][NTf2]-phosphate cosolvent by magnetic immobilized penicillin G acylase,” J. Chinese Chem. Soc., vol. 66, no. 12, pp. 1649–1657, 2019.
[6] C. Cui et al., “Effects of ionic liquid concentration on coal low-temperature oxidation,” Energy Sci. Eng., vol. 7, no. 5, pp. 2165–2179, 2019.
[7] X. ling Qu et al., “A Brønsted Acidic Ionic Liquid as an Efficient and Selective Catalyst System for Bioderived High Molecular Weight Poly(ethylene 2,5-furandicarboxylate),” ChemSusChem, vol. 12, no. 22, pp. 4927–4935, 2019.
[8] Y. Kang et al., “Metal-Free Photochemical Degradation of Lignin-Derived Aryl Ethers and Lignin by Autologous Radicals through Ionic Liquid Induction,” ChemSusChem, vol. 12, no. 17, pp. 4005–4013, 2019.
[9] K. Pu et al., “Nanoscaled Lithium Powders with Protection of Ionic Liquid for Highly Stable Rechargeable Lithium Metal Batteries,” Adv. Sci., vol. 6, no. 24, 2019.
[10] C. Chen, T. Yu, M. Yang, X. Zhao, and X. Shen, “An All-Solid-State Rechargeable Chloride Ion Battery,” Adv. Sci., vol. 6, no. 6, pp. 1–12, 2019.
[11] M. J. Zhao et al., “Pretreatment of corn cob in [EMIM][OAc] and [EMIM][OAc]/ethanol (water),” Bioprocess Biosyst. Eng., vol. 42, no. 8, pp. 1273–1283, 2019.
[12] D. Zhang, J. Tang, and H. Liu, “Rapid determination of lambda-cyhalothrin using a fluorescent probe based on ionic-liquid-sensitized carbon dots coated with molecularly imprinted polymers,” Anal. Bioanal. Chem., vol. 411, no. 20, pp. 5309–5316, 2019.
[13] Y. Zhang, L. Chen, L. Hu, and Z. Yan, “Characterization of Cellulose/Silver Nanocomposites Prepared by Vegetable Oil-Based Microemulsion Method and Their Catalytic Performance to 4-Nitrophenol Reduction,” J. Polym. Environ., vol. 27, no. 12, pp. 2943–2955, 2019.
[14] Z. Yang et al., “Preparation of porous uranium oxide hollow nanospheres with peroxidase mimicking activity: application to the colorimetric determination of tin(II),” Microchim. Acta, vol. 186, no. 8, pp. 1–8, 2019.
[15] L. Yang, Z. Sun, F. Li, S. Du, and W. Song, “Performance enhancement of cellulose-based biocomposite ionic actuator by doping with MWCNT,” Appl. Phys. A Mater. Sci. Process., vol. 125, no. 8, pp. 1–15, 2019.
[16] P. Xu, Z. P. Cui, G. Ruan, and Y. S. Ding, “Enhanced Crystallization Kinetics of PLLA by Ethoxycarbonyl Ionic Liquid Modified Graphene,” Chinese J. Polym. Sci. (English Ed., vol. 37, no. 3, pp. 243–252, 2019.
[17] Y. Xiao, H. F. Lü, X. Yi, J. Deng, and C. M. Shu, “Treating bituminous coal with ionic liquids to inhibit coal spontaneous combustion,” J. Therm. Anal. Calorim., vol. 135, no. 5, pp. 2711–2721, 2019.
[18] M. Xiao et al., “Preparation of Co 3 O 4 /nitrogen-doped carbon composite by in situ solvothermal with ionic liquid and its electrochemical performance as lithium-ion battery anode,” Ionics (Kiel)., vol. 25, no. 2, pp. 475–482, 2019.
[19] M. Xiao, Y. Meng, C. Duan, F. Zhu, and Y. Zhang, “Ionic liquid derived Co 3 O 4 /Nitrogen doped carbon composite as anode of lithium ion batteries with enhanced rate performance and cycle stability,” J. Mater. Sci. Mater. Electron., vol. 30, no. 6, pp. 6148–6156, 2019.
[20] L. Wei, X. Huang, L. Zheng, J. Wang, Y. Ya, and F. Yan, “Electrochemical sensor for the sensitive determination of parathion based on the synergistic effect of ZIF-8 and ionic liquid,” Ionics (Kiel)., vol. 25, no. 10, pp. 5013–5021, 2019.
[21] A. Wang, S. Li, H. Chen, Y. Hu, and X. Peng, “Synthesis and characterization of a novel microcrystalline cellulose-based polymeric bio-sorbent and its adsorption performance for Zn(II),” Cellulose, vol. 26, no. 11, pp. 6849–6859, 2019.
[22] P. Wang, Y. Zhou, P. Xu, and Y. Ding, “Effect of P[MPEGMA-IL] on morphological evolution and conductivity behavior of PLA/PCL blends,” Ionics (Kiel)., vol. 25, no. 7, pp. 3189–3196, 2019.
[23] X. Wang and Z. Wang, “Enhanced iodine uptake in ionic liquid by biomass, solvents, or supported materials,” Int. J. Environ. Sci. Technol., vol. 16, no. 7, pp. 3317–3324, 2019.
[24] W. Tang et al., “Facile pyrolysis synthesis of ionic liquid capped carbon dots and subsequent application as the water-based lubricant additives,” J. Mater. Sci., vol. 54, no. 2, pp. 1171–1183, 2019.
[25] X. Tan et al., “Ionic liquids produce heteroatom-doped Pt/TiO2 nanocrystals for efficient photocatalytic hydrogen production,” Nano Res., vol. 12, no. 8, pp. 1967–1972, 2019.
[26] Y. Sun, X. Xu, M. Qin, N. Pang, G. Wang, and L. Zhuang, “Dodecyl sulfate-based anionic surface-active ionic liquids: synthesis, surface properties, and interaction with gelatin,” Colloid Polym. Sci., vol. 297, no. 4, pp. 571–586, 2019.
[27] X. Liu, Y. Meng, R. Li, M. Du, F. Zhu, and Y. Zhang, “Nitrogen-doped carbon-coated cotton-derived carbon fibers as high-performance anode materials for lithium-ion batteries,” Ionics (Kiel)., vol. 25, no. 12, pp. 5799–5807, 2019.
[28] Y. Liao et al., “One-step ionic liquid-based ultrasound-assisted dispersive liquid–liquid microextraction coupled with high-performance liquid chromatography for the determination of pyrethroids in traditional Chinese medicine oral liquid preparations,” BMC Chem., vol. 13, no. 1, pp. 1–10, 2019.
[29] X. Li et al., “A boron nitride electrode modified with a nanocomposite prepared from an ionic liquid and tungsten disulfide for voltammetric sensing of 4-aminophenol,” Microchim. Acta, vol. 186, no. 9, 2019.
[30] C. Jiao, H. Wang, X. Chen, and G. Tang, “Flame retardant and thermal degradation properties of flame retardant thermoplastic polyurethane based on HGM@[EOOEMIm][BF 4 ],” J. Therm. Anal. Calorim., vol. 135, no. 6, pp. 3141–3152, 2019.
[31] Y. L. Hu, R. L. Zhang, and D. Fang, “Quaternary phosphonium cationic ionic liquid/porous metal–organic framework as an efficient catalytic system for cycloaddition of carbon dioxide into cyclic carbonates,” Environ. Chem. Lett., vol. 17, no. 1, pp. 501–508, 2019.
[32] J. Gao, C. Chen, L. Wang, Y. Lei, H. Ji, and S. Liu, “Utilization of inorganic salts as adjuvants for ionic liquid–water pretreatment of lignocellulosic biomass: enzymatic hydrolysis and ionic liquid recycle,” 3 Biotech, vol. 9, no. 7, pp. 1–10, 2019.
[33] J. Fan, Q. Xiao, Y. Fang, L. Li, and W. Yuan, “A rechargeable Zn/graphite dual-ion battery with an ionic liquid-based electrolyte,” Ionics (Kiel)., vol. 25, no. 3, pp. 1303–1313, 2019.
[34] W. Duan et al., “A self-powered photoelectrochemical aptamer probe for oxytetracycline based on the use of a NiO nanocrystal/g-C3N4 heterojunction,” Microchim. Acta, vol. 186, no. 11, 2019.
[35] J. Deng, H. F. Lü, Y. Xiao, C. P. Wang, C. M. Shu, and Z. G. Jiang, “Thermal effect of ionic liquids on coal spontaneous combustion,” J. Therm. Anal. Calorim., vol. 138, no. 5, pp. 3415–3424, 2019.
[36] H. Dai, Y. Huang, Y. Zhang, H. Zhang, and H. Huang, “Green and facile fabrication of pineapple peel cellulose/magnetic diatomite hydrogels in ionic liquid for methylene blue adsorption,” Cellulose, vol. 26, no. 6, pp. 3825–3844, 2019.
[37] Y. Chen, L. Sun, Z. Lu, Z. Liu, Y. Jiang, and K. Zhuo, “Preparation of nitrogen and sulfur co-doped graphene aerogel with hierarchical porous structure using ionic liquid precursor for high-performance supercapacitor,” Ionics (Kiel)., vol. 25, no. 6, pp. 2781–2789, 2019.
[38] L. Chen, J. Wu, and X. Huang, “Multiple monolithic fibers modified with a molecularly imprinted polymer for solid phase microextraction of sulfonylurea herbicides based on boron-nitrogen interaction,” Microchim. Acta, vol. 186, no. 7, 2019.
[39] X. Chen et al., “Electrodeposition of alginate–MnO2–C composite film on the carbon ionic liquid electrode for the direct electrochemistry and electrocatalysis of myoglobin,” Polym. Bull., vol. 76, no. 8, pp. 3971–3987, 2019.
[40] Z. Bai, C. Wang, and J. Deng, “Analysis of thermodynamic characteristics of imidazolium-based ionic liquid on coal,” J. Therm. Anal. Calorim., no. 0123456789, 2019.
[41] S. Liu, Q. Li, and G. Li, “Investigation of the solubility and dispersion degree of calf skin collagen in ionic liquids,” J. Leather Sci. Eng., vol. 1, no. 1, pp. 1–12, 2019.
[42] S. Xiang, S. Chen, M. Yao, F. Zheng, and Q. Lu, “Strain sensor based on a flexible polyimide ionogel for application in high- and lowerature environments,” J. Mater. Chem. C, vol. 7, no. 31, pp. 9625–9632, 2019.
[43] Z. Wang, Q. Xu, L. Wang, L. Heng, and L. Jiang, “Temperature-induced switchable interfacial interactions on slippery surfaces for controllable liquid manipulation,” J. Mater. Chem. A, vol. 7, no. 31, pp. 18510–18518, 2019.
[44] Y. Peng, R. Tan, J. Ma, Q. Li, T. Wang, and X. Duan, “Electrospun Li3V2(PO4)3 nanocubes/carbon nanofibers as free-standing cathodes for high-performance lithium-ion batteries,” J. Mater. Chem. A, vol. 7, no. 24, pp. 14681–14688, 2019.
[45] L. Zhang, Y. Guo, K. Shen, J. Huo, Y. Liu, and S. Guo, “Ion-matching porous carbons with ultra-high surface area and superior energy storage performance for supercapacitors,” J. Mater. Chem. A, vol. 7, no. 15, pp. 9163–9172, 2019.
[46] Y. Huang et al., “Efficient production of 5-hydroxymethylfurfural from fructose over CuAPO-5 molecular sieves synthesized using an ionothermal method,” RSC Adv., vol. 9, no. 56, pp. 32848–32853, 2019.
[47] W. Yang, G. Guo, Z. Mei, and Y. Yu, “Deep oxidative desulfurization of model fuels catalysed by immobilized ionic liquid on MIL-100(Fe),” RSC Adv., vol. 9, no. 38, pp. 21804–21809, 2019.
[48] C. L. Geng et al., “High energy density and high working voltage of a quasi-solid-state supercapacitor with a redox-active ionic liquid added gel polymer electrolyte,” New J. Chem., vol. 43, no. 47, pp. 18935–18942, 2019.
[49] Y. Yue et al., “An ultra-high H2S-resistant gold-based imidazolium ionic liquid catalyst for acetylene hydrochlorination,” New J. Chem., vol. 43, no. 32, pp. 12767–12775, 2019.
[50] Y. Zhang, D. Zhang, J. Liu, S. Wang, and H. Liu, “A high photoluminescence sensor for selective detection of cartap based on functionalized VBimBF4B ionic liquid-strengthened sulfur-doped carbon nanodots,” New J. Chem., vol. 43, no. 23, pp. 8873–8881, 2019.
[51] B. Zhao, B. Wang, H. Lu, S. Dai, and Z. Huang, “Tuning the visible-light photocatalytic degradation activity of thin nanosheets constructed porous g-C3N4 microspheres by decorating ionic liquid modified carbon dots: Roles of heterojunctions and surface charges,” New J. Chem., vol. 43, no. 25, pp. 10141–10150, 2019.
[52] B. B. Asare Bediako et al., “Ru-Catalyzed methanol homologation with CO2 and H2 in an ionic liquid,” Green Chem., vol. 21, no. 15, pp. 4152–4158, 2019.
[53] T. Wang, Q. Wang, P. Li, and H. Yang, “Temperature-responsive ionic liquids to set up a method for the simultaneous extraction and: In situ preconcentration of hydrophilic and lipophilic compounds from medicinal plant matrices,” Green Chem., vol. 21, no. 15, pp. 4133–4142, 2019.
[54] A. Yao et al., “Ionic liquids with polychloride anions as effective oxidants for the dissolution of UO2,” Dalt. Trans., vol. 48, no. 43, pp. 16249–16257, 2019.
[55] T. Kim et al., “Hydrothermal synthesis of natroalunite nanostructures and their F--ion removal properties in water,” CrystEngComm, vol. 21, no. 33, pp. 4987–4995, 2019.
[56] H. Qian, C. Liu, Q. Yang, X. Liu, H. Gao, and W. Zhou, “The extraction of pyrethroid insecticides in juice and tea beverages by liquid-phase microextraction using deep eutectic solvents,” Anal. Methods, vol. 11, no. 38, pp. 4923–4930, 2019.
[57] B. Wang, H. Tan, T. Zhang, W. Duan, and Y. Zhu, “Hydrothermal synthesis of N-doped carbon dots from an ethanolamine-ionic liquid gel to construct label-free multifunctional fluorescent probes for Hg 2+ , Cu 2+ and S 2 O 32,” Analyst, vol. 144, no. 9, pp. 3013–3022, 2019.
[58] H. Wu et al., “Surface engineering in PbS: Via partial oxidation: Towards an advanced electrocatalyst for reduction of levulinic acid to γ-valerolactone,” Chem. Sci., vol. 10, no. 6, pp. 1754–1759, 2019.
[59] Q. Mei, X. Shen, H. Liu, H. Liu, J. Xiang, and B. Han, “Selective utilization of methoxy groups in lignin for: N -methylation reaction of anilines,” Chem. Sci., vol. 10, no. 4, pp. 1082–1088, 2019.
[60] T. Kim et al., “Preparation of mesoporous ZnAl2O4 nanoflakes by ion exchange from a Na-dawsonite parent material in the presence of an ionic liquid,” RSC Adv., vol. 9, no. 21, pp. 11894–11900, 2019.
[61] S. Cheng, B. Chen, L. Qin, Y. Zhang, G. Gao, and M. He, “Cross-linked poly(ionic liquid) as precursors for nitrogen-doped porous carbons,” RSC Adv., vol. 9, no. 15, pp. 8137–8145, 2019.
[62] L. Wang, G. Wang, Y. Wang, H. Liu, S. Dong, and J. Hao, “Fluorescent hybrid nanospheres induced by single-stranded DNA and magnetic carbon quantum dots,” New J. Chem., vol. 43, no. 12, pp. 4965–4974, 2019.
[63] J. Dang et al., “Coordination of Nd(iii) and Eu(iii) with monodentate organophosphorus ligands in ionic liquids: Spectroscopy and thermodynamics,” New J. Chem., vol. 43, no. 9, pp. 3866–3873, 2019.
[64] S. Yang et al., “Efficient hydrodeoxygenation of lignin-derived phenols and dimeric ethers with synergistic [Bmim]PF6-Ru/SBA-15 catalysis under acid free conditions,” Green Chem., vol. 21, no. 3, pp. 597–605, 2019.
[65] M. Yang, X. Zhang, and G. Cheng, “A two-stage pretreatment using dilute sodium hydroxide solution followed by an ionic liquid at low temperatures: Toward construction of lignin-first biomass pretreatment,” Bioresour. Technol. Reports, vol. 7, no. June, p. 100286, 2019.
[66] P. Ma et al., “Spinel-type solar-thermal conversion coatings on supercapacitors: An effective strategy for capacitance recovery at low temperatures,” Energy Storage Mater., vol. 23, no. May, pp. 159–167, 2019.
[67] F. Li, M. Gao, and B. Guo, “Friction and lubrication mechanism of a new type of anti-magnetic bearing Ti60 titanium alloy material,” Results Phys., vol. 14, no. October 2018, p. 101827, 2019.
[68] W. Wang et al., “Electrochemistry of myoglobin on graphene–SnO2 nanocomposite modified electrode and its electrocatalysis,” Arab. J. Chem., vol. 12, no. 8, pp. 3336–3344, 2019.
[69] K. Wu, X. Zhou, X. Wu, B. Lv, G. Jing, and Z. Zhou, “Understanding the corrosion behavior of carbon steel in amino-functionalized ionic liquids for CO2 capture assisted by weight loss and electrochemical techniques,” Int. J. Greenh. Gas Control, vol. 83, no. January, pp. 216–227, 2019.
[70] W. Zhang et al., “Electrosynthesized alkyl-modified poly(3,4‑propylenedioxyselenophene) with superior electrochromic performances in an ionic liquid,” J. Electroanal. Chem., vol. 833, no. September 2018, pp. 17–25, 2019.
[71] Y. Li et al., “Poly(ionic liquid)-polyethylene oxide semi-interpenetrating polymer network solid electrolyte for safe lithium metal batteries,” Chem. Eng. J., vol. 375, no. June, 2019.
[72] J. Zhang, J. Sun, T. Ahmed Shifa, D. Wang, X. Wu, and Y. Cui, “Hierarchical MnO2/activated carbon cloth electrode prepared by synchronized electrochemical activation and oxidation for flexible asymmetric supercapacitors,” Chem. Eng. J., vol. 372, no. January, pp. 1047–1055, 2019.
[73] K. Wang et al., “Synthesis of a novel anti-freezing, non-drying antibacterial hydrogel dressing by one-pot method,” Chem. Eng. J., vol. 372, no. December 2018, pp. 216–225, 2019.
[74] H. Fang et al., “A novel high-strength poly(ionic liquid)/PVA hydrogel dressing for antibacterial applications,” Chem. Eng. J., vol. 365, no. January, pp. 153–164, 2019.
[75] J. Zhao et al., “Supported ionic liquid-palladium catalyst for the highly effective hydrochlorination of acetylene,” Chem. Eng. J., vol. 360, no. September 2018, pp. 38–46, 2019.
[76] Y. Luo, Q. Chen, and X. Shen, “Complexation and extraction investigation of rubidium ion by calixcrown-C2mimNTf2 system,” Sep. Purif. Technol., vol. 227, no. June, p. 115704, 2019.
[77] Z. Sun, S. Du, D. Zhang, and W. Song, “Influence of pH and loading of PANI on electrochemical and electromechanical properties for high-performance renewable soft actuator with nano-biocomposite electrode,” React. Funct. Polym., vol. 139, no. September 2018, pp. 102–111, 2019.
[78] Y. H. Wang et al., “Activated carbon spheres@NiCo2(CO3)1.5(OH)3 hybrid material modified by ionic liquids and its effects on flame retardant and mechanical properties of PVC,” Compos. Part B Eng., vol. 179, no. October, p. 107543, 2019.
[79] G. Sang et al., “Electromagnetic interference shielding performance of polyurethane composites: A comparative study of GNs-IL/Fe 3 O 4 and MWCNTs-IL/Fe 3 O 4 hybrid fillers,” Compos. Part B Eng., vol. 164, no. January, pp. 467–475, 2019.
[80] X. Lu, J. Zhu, X. Qian, and J. Ji, “Separation of methyl linolenate and its analogues by functional mixture of imidazolium based ionic liquid-organic solvent-cuprous salt,” Chinese J. Chem. Eng., vol. 27, no. 4, pp. 811–817, 2019.
[81] Y. Wang et al., “A new strategy for identifying the water-insoluble radiolytic products of BPC6/ionic liquids and accessing their influence on the Cs extraction,” Radiat. Phys. Chem., vol. 165, no. September 2018, p. 108408, 2019.
[82] X. Wang et al., “An ultrasensitive luminol cathodic electrochemiluminescence probe with highly porous Pt on ionic liquid functionalized graphene film as platform for carcinoembryonic antigen sensing,” Biosens. Bioelectron., vol. 141, no. June, p. 111436, 2019.
[83] F. Cheng, J. Sun, Z. Wang, X. Zhao, and Y. Hu, “Organosolv fractionation and simultaneous conversion of lignocellulosic biomass in aqueous 1,4-butanediol/acidic ionic-liquids solution,” Ind. Crops Prod., vol. 138, no. February, p. 111573, 2019.
[84] P. Zhang et al., “Catalytic performance of ionic liquid for dehydrochlorination reaction: Excellent activity and unparalled stability,” Appl. Catal. B Environ., vol. 255, no. May, p. 117757, 2019.
[85] J. Zhang, J. Sun, Y. Hu, D. Wang, and Y. Cui, “Electrochemical capacitive properties of all-solid-state supercapacitors based on ternary MoS2/CNTs-MnO2 hybrids and ionic mixture electrolyte,” J. Alloys Compd., vol. 780, pp. 276–283, 2019.
[86] Z. Sun, L. Yang, D. Zhang, and W. Song, “High performance, flexible and renewable nano-biocomposite artificial muscle based on mesoporous cellulose/ ionic liquid electrolyte membrane,” Sensors Actuators, B Chem., vol. 283, no. December 2018, pp. 579–589, 2019.
[87] W. Liu et al., “Facile synthesis and multicolor luminescence properties of Gd4O3F6:Ln3+ (Ln = Eu, Tb, Dy, Sm, Ho, Tm, Yb/Er, Yb/Ho) microcrystals,” Opt. Mater. (Amst)., vol. 94, no. May, pp. 92–102, 2019.
[88] H. Sun et al., “Separation of lithium isotopes by using solvent extraction system of crown ether-ionic liquid,” Fusion Eng. Des., vol. 149, no. June, p. 111338, 2019.
[89] F. F. Zhang, F. F. Zheng, Y. L. Yin, X. H. Wu, and G. Chen, “Falling film flow of [EMIm]Ac ionic liquid aqueous solution on horizontal tubes considering the Marangoni effect,” Exp. Therm. Fluid Sci., vol. 107, no. January, pp. 130–139, 2019.
[90] C. Liu et al., “Effect of phase morphology on electromagnetic interference shielding performance of silicone rubber/POE blends containing ILs modified MWCNTs,” Synth. Met., vol. 256, no. June, p. 116140, 2019.
[91] Y. Li et al., “Double-protected zinc ferrite nanospheres as high rate and stable anode materials for lithium ion batteries,” J. Power Sources, vol. 442, no. September, p. 227256, 2019.
[92] J. Lang, X. Zhang, L. Liu, B. Yang, J. Yang, and X. Yan, “Highly enhanced energy density of supercapacitors at extremely low temperatures,” J. Power Sources, vol. 423, no. July 2018, pp. 271–279, 2019.
[93] J. Wang, P. Li, Y. Zhang, Y. Liu, W. Wu, and J. Liu, “Porous Nafion nanofiber composite membrane with vertical pathways for efficient through-plane proton conduction,” J. Memb. Sci., vol. 585, no. May, pp. 157–165, 2019.
[94] X. Lu, Q. Chen, D. Zhao, J. Zhu, and J. Ji, “Silver-based ionic liquid as separation media: Supported liquid membrane for facilitated methyl linolenate transport,” J. Memb. Sci., vol. 585, no. January, pp. 218–229, 2019.
[95] H. F. Lü, Y. Xiao, J. Deng, D. jiang Li, L. Yin, and C. M. Shu, “Inhibiting effects of 1-butyl-3-methyl imidazole tetrafluoroborate on coal spontaneous combustion under different oxygen concentrations,” Energy, vol. 186, p. 115907, 2019.
[96] X. Zhang, S. Yu, Q. Zhu, and L. Zhao, “Enhanced anhydrous proton conductivity of SPEEK/IL composite membrane embedded with amino functionalized mesoporous silica,” Int. J. Hydrogen Energy, vol. 44, no. 12, pp. 6148–6159, 2019.
[97] G. yaohua, X. ping, J. feng, and S. keren, “Co-immobilization of laccase and ABTS onto novel dual-functionalized cellulose beads for highly improved biodegradation of indole,” J. Hazard. Mater., vol. 365, no. September 2018, pp. 118–124, 2019.
[98] X. Wen, F. Yuwen, Z. Ding, W. Zhang, R. Yao, and J. Lu, “Electric arc-induced damage on electroless Ag film using ionic liquid as a lubricant under sliding electrical contact,” Tribol. Int., vol. 135, no. January, pp. 269–276, 2019.
[99] S. Li et al., “Engineering polyoxometalate anions on porous ionic network towards highly catalytic active noble metal clusters,” Appl. Surf. Sci., vol. 496, no. March, p. 143650, 2019.
[100] M. Xiao et al., “Tailoring nitrogen content in doped carbon by a facile synthesis with ionic liquid precursors for lithium ion batteries,” Appl. Surf. Sci., vol. 494, no. June, pp. 532–539, 2019.
[101] C. Xie, W. Li, Q. Liang, S. Yu, and L. Li, “Fabrication of robust silk fibroin film by controlling the content of β-sheet via the synergism of Uv-light and ionic liquids,” Appl. Surf. Sci., vol. 492, no. June, pp. 55–65, 2019.
[102] C. Gan, T. Liang, W. Li, X. Fan, and M. Zhu, “Amine-terminated ionic liquid modified graphene oxide/copper nanocomposite toward efficient lubrication,” Appl. Surf. Sci., vol. 491, no. June, pp. 105–115, 2019.
[103] F. Jiang, C. Pan, Y. Zhang, and Y. Fang, “Cellulose graft copolymers toward strong thermoplastic elastomers via RAFT polymerization,” Appl. Surf. Sci., vol. 480, no. January, pp. 162–171, 2019.
[104] Y. Ren et al., “Adsorption of imidazolium-based ionic liquid on sodium bentonite and its effects on rheological and swelling behaviors,” Appl. Clay Sci., vol. 182, no. 8, p. 105248, 2019.
[105] X. Y. Ou et al., “Highly efficient asymmetric reduction of 2-octanone in biphasic system by immobilized Acetobacter sp. CCTCC M209061 cells,” J. Biotechnol., vol. 299, no. January, pp. 37–43, 2019.
[106] P. Xie, X. Zhou, and L. Zheng, “Stereoselective synthesis of a key chiral intermediate of (S)-Rivastigmine by AKR-GDH recombinant whole cells,” J. Biotechnol., vol. 289, no. April 2018, pp. 64–70, 2019.
[107] B. Diao et al., “Separation of azeotrope 2,2,3,3-tetrafluoro-1-propanol and water by extractive distillation using ionic liquids: Vapor-liquid equilibrium measurements and interaction analysis,” J. Mol. Liq., vol. 292, p. 111424, 2019.
[108] Y. Sun et al., “Chitosan dissolution with sulfopropyl imidazolium Brönsted acidic ionic liquids,” J. Mol. Liq., vol. 293, p. 111533, 2019.
[109] Y. Fang, L. Chen, L. Gao, and Z. Yan, “Effect of 1-butyl-3-methylimidazolium chloride on the lyotropic liquid crystal structure and properties of TX-100/oleic acid/water system,” J. Mol. Liq., vol. 294, p. 111637, 2019.
[110] X. Geng et al., “Ternary liquid-liquid equilibrium of methanol + isopropyl acetate/methyl methacrylate + 1-methylmidazole hydrogen sulfate at different temperatures and 1 atm,” J. Mol. Liq., vol. 283, pp. 515–521, 2019.
[111] F. Yang, X. Wang, Q. Chen, and H. Tan, “Improvement of the properties of 1-ethyl-3-methylimidazolium acetate using organic solvents for biofuel process,” J. Mol. Liq., vol. 284, pp. 82–91, 2019.
[112] J. Deng, Z. J. Bai, Y. Xiao, B. Laiwang, C. M. Shu, and C. P. Wang, “Thermogravimetric analysis of the effects of four ionic liquids on the combustion characteristics and kinetics of weak caking coal,” J. Mol. Liq., vol. 277, pp. 876–885, 2019.
[113] J. Lei et al., “The dilational rheology and splashing behavior of ionic liquid-type imidazolium Gemini surfactant solutions: Impact of alkyl chain length,” J. Mol. Liq., vol. 283, pp. 725–735, 2019.
[114] J. Gao, D. Xu, X. Cha, Z. Cui, L. Zhang, and Y. Wang, “Multiscale modeling and liquid-liquid equilibria insights for the extraction of heterocyclic nitrogen compounds from coal tar via [emim][TOS] as extractant,” J. Mol. Liq., vol. 277, pp. 825–832, 2019.
[115] Z. Chen, Z. Li, X. Ma, L. Xu, Y. Wang, and S. Zhang, “Aqueous-phase green synthesis of formate-based ionic liquids and their thermophysical properties,” J. Mol. Liq., vol. 279, pp. 370–377, 2019.
[116] W. Zhu, Y. Jia, Q. Zhang, J. Sun, Y. Jing, and J. Li, “The effect of ionic liquids as co-extractant with crown ether for the extraction of lithium in dichloromethane-water system,” J. Mol. Liq., vol. 285, pp. 75–83, 2019.
[117] G. Li, D. Zhou, Q. Q. Xu, G. Y. Qiao, and J. Z. Yin, “Effect of different co-solvents on solubility of ILs [Emim]Ac, [Bmim][NTf 2 ] in scCO 2,” J. Mol. Liq., vol. 284, pp. 102–109, 2019.
[118] Y. Li, S. Zhang, Q. Ding, B. Qin, and L. Hu, “Versatile 4, 6-dimethyl-2-mercaptopyrimidine based ionic liquids as high-performance corrosion inhibitors and lubricants,” J. Mol. Liq., vol. 284, pp. 577–585, 2019.
[119] C. Liu, G. Ruan, P. Wang, Y. Zhou, P. Xu, and Y. Ding, “Synergistic effect of ILs modified MWCNTs on enhanced dielectric properties of silicone rubber/POE blends,” Mater. Lett., vol. 239, pp. 203–206, 2019.
[120] H. Yang, L. R. Shen, H. Bu, and G. Li, “Stable and biocompatible hydrogel composites based on collagen and dialdehyde carboxymethyl cellulose in a biphasic solvent system,” Carbohydr. Polym., vol. 222, no. June, p. 114974, 2019.
[121] H. Dai et al., “Green pH/magnetic sensitive hydrogels based on pineapple peel cellulose and polyvinyl alcohol: synthesis, characterization and naringin prolonged release,” Carbohydr. Polym., vol. 209, no. 381, pp. 51–61, 2019.
[122] Y. Hao, Y. Cui, J. Peng, N. Zhao, S. Li, and M. Zhai, “Preparation of graphene oxide/cellulose composites in ionic liquid for Ce (III) removal,” Carbohydr. Polym., vol. 208, no. December 2018, pp. 269–275, 2019.
[123] J. Zhang et al., “Water addition enhanced thermal stability of alkylimidazolium acetate in Ionosolv treatment of lignin,” Int. J. Biol. Macromol., vol. 141, pp. 1055–1064, 2019.
[124] S. Wang, X. Ma, and P. Zheng, “Sulfo-functional 3D porous cellulose/graphene oxide composites for highly efficient removal of methylene blue and tetracycline from water,” Int. J. Biol. Macromol., vol. 140, pp. 119–128, 2019.
[125] H. Lyu, J. Fan, Y. Ling, Y. Yu, and Z. Xie, “Functionalized cross-linked chitosan with ionic liquid and highly efficient removal of azo dyes from aqueous solution,” Int. J. Biol. Macromol., vol. 126, pp. 1023–1029, 2019.
[126] M. Zhang et al., “Enhanced removal of As(Ⅲ) and As(Ⅴ) from aqueous solution using ionic liquid-modified magnetic graphene oxide,” Chemosphere, vol. 234, pp. 196–203, 2019.
[127] W. Li et al., “Study on thermal behavior of regenerated micro-crystalline cellulose containing slight amount of water induced by hydrogen-bonds transformation,” Polymer (Guildf)., vol. 185, no. October, p. 121989, 2019.
[128] Z. Zhu, H. Wei, F. Wang, H. Sun, W. Liang, and A. Li, “Ionic liquid-based monolithic porous polymers as efficient flame retardant and thermal insulation materials,” Polymer (Guildf)., vol. 185, no. October, 2019.
[129] J. Wu et al., “Crystallization of ionic liquid [EMIM][NO3] under extreme conditions,” J. Mol. Struct., vol. 1189, no. 3, pp. 265–271, 2019.
[130] H. Wang, J. Cui, H. Li, Y. Zhao, and J. Wang, “The effect of cationic structure of ionic liquids on their interactions with 5-hydroxymethylfurfural,” J. Mol. Struct., vol. 1179, pp. 57–64, 2019.
[131] P. Sun, K. Huang, and H. Liu, “The nature of salt effect in enhancing the extraction of rare earths by non-functional ionic liquids: Synergism of salt anion complexation and Hofmeister bias,” J. Colloid Interface Sci., vol. 539, pp. 214–222, 2019.
[132] H. Wang et al., “Vortex-assisted deep eutectic solvent reversed-phase liquid–liquid microextraction of triazine herbicides in edible vegetable oils,” J. Chromatogr. A, vol. 1589, pp. 10–17, 2019.
[133] Z. Zhu et al., “Liquid-liquid extraction of methanol from its mixtures with hexane using three imidazolium-based ionic liquids,” J. Chem. Thermodyn., vol. 138, pp. 189–195, 2019.
[134] Y. Zhao, Y. Chen, M. Fang, H. Zhang, and K. Zhuo, “Volumetric and viscosity properties of glycine in ionic liquid + water solutions at 298.15 K,” J. Chem. Thermodyn., vol. 130, pp. 198–203, 2019.
[135] W. Bai, Y. Dai, X. Pan, Z. Zhu, Y. Wang, and J. Gao, “Liquid-liquid equilibria for azeotropic mixture of methyl tert-butyl ether and methanol with ionic liquids at different temperatures,” J. Chem. Thermodyn., vol. 132, pp. 76–82, 2019.
[136] J. Zhao et al., “Nitrogen- and phosphorus-codoped carbon-based catalyst for acetylene hydrochlorination,” J. Catal., vol. 373, pp. 240–249, 2019.
[137] L. Wang, Y. Liu, Y. Xu, and J. Wei, “CO2 and CH4 sorption and selectivity by solid-state [P2 4 4 4][PF6], [P4 4 4 4][PF6]and [P6 4 4 4][PF6]ionic liquids under different pressures,” Fuel, vol. 253, no. May, pp. 139–145, 2019.
[138] J. Deng, Z. J. Bai, Y. Xiao, C. M. Shu, and B. Laiwang, “Effects of imidazole ionic liquid on macroparameters and microstructure of bituminous coal during low-temperature oxidation,” Fuel, vol. 246, no. September 2018, pp. 160–168, 2019.
[139] Z. Chen, Z. Li, X. Ma, Y. Wang, Q. Zhou, and S. Zhang, “A new DMF-derived ionic liquid with ultra-high conductivity for high-capacitance electrolyte in electric double-layer capacitor,” Electrochim. Acta, vol. 319, pp. 843–848, 2019.
[140] W. Wang et al., “1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF4) as an ionic liquid-type electrolyte additive to enhance the low-temperature performance of LiNi0.5Co0.2Mn0.3O2/graphite batteries,” Electrochim. Acta, vol. 317, pp. 146–154, 2019.
[141] D. Wang, G. Zhu, Z. Li, M. Xue, and C. Xia, “Conceptual design of production of eco-friendly polyoxymethylene dimethyl ethers catalyzed by acid functionalized ionic liquids,” Chem. Eng. Sci., vol. 206, pp. 10–21, 2019.
[142] F. Liu et al., “Nitrogen, oxygen and sulfur co-doped hierarchical porous carbons toward high-performance supercapacitors by direct pyrolysis of kraft lignin,” Carbon N. Y., vol. 149, pp. 105–116, 2019.
[143] S. Guo et al., “Effects of the Water Content on the Transport Properties of Ionic Liquids,” Ind. Eng. Chem. Res., vol. 58, no. 42, pp. 19661–19669, 2019.
[144] Z. Li et al., “Highly Efficient and Enzyme-Recoverable Method for Enzymatic Concentrating Omega-3 Fatty Acids Generated by Hydrolysis of Fish Oil in a Substrate-Constituted Three-Liquid-Phase System,” J. Agric. Food Chem., vol. 67, no. 9, pp. 2570–2580, 2019.
[145] Y. Xuan, X. Ding, N. Gao, Y. Ding, X. Meng, and G. Chen, “Vapor Pressure Measurement of Ternary Systems LiCl + [Emim]Cl + H2O, LiBr + [Emim]Cl + H2O, and LiCl + [Emim]Br + H2O,” J. Chem. Eng. Data, vol. 64, no. 6, pp. 2406–2413, 2019.
[146] L. Yang et al., “Effect of Alkyl Chain Length on Shale Hydration Inhibitive Performance of Vinylimidazolium-Based Ionic Liquids,” Ind. Eng. Chem. Res., 2019.
[147] Q. Wei, M. Zhang, D. Zhou, X. Li, H. Bian, and Y. Fang, “Ultrafast Hydrogen Bond Exchanging between Water and Anions in Concentrated Ionic Liquid Aqueous Solutions,” J. Phys. Chem. B, vol. 123, no. 22, pp. 4766–4775, 2019.
[148] J. Wang, H. Cheng, Z. Song, L. Chen, L. Deng, and Z. Qi, “Carbon Dioxide Solubility in Phosphonium-Based Deep Eutectic Solvents: An Experimental and Molecular Dynamics Study,” Ind. Eng. Chem. Res., vol. 58, no. 37, pp. 17514–17523, 2019.
[149] X. D. Shen, X. B. Zhou, and D. Q. Liang, “Kinetic Effects of Ionic Liquids on Methane Hydrate,” Energy and Fuels, vol. 33, no. 2, pp. 1422–1432, 2019.
[150] M. Lan, Z. Zhao, Q. Zeng, C. Zhou, and J. Zhang, “Rapid Measurement of Gas Solubility in Ionic Liquids with a Simple Tube-in-Tube Reactor,” Ind. Eng. Chem. Res., vol. 58, no. 16, pp. 6696–6703, 2019.
[151] B. Jiang et al., “Novel Deep Eutectic Solvents for Highly Efficient and Reversible Absorption of SO2 by Preorganization Strategy,” ACS Sustain. Chem. Eng., vol. 7, no. 9, pp. 8347–8357, 2019.
[152] C. Zhu et al., “Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Alloyed Cu-Ni Encapsulated in Biochar Catalysts,” ACS Sustain. Chem. Eng., vol. 7, no. 24, pp. 19556–19569, 2019.
[153] F. Ma et al., “Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries,” ACS Sustain. Chem. Eng., vol. 7, no. 5, pp. 4675–4683, 2019.
[154] C. Zhu et al., “Tandem Conversion of Fructose to 2,5-Dimethylfuran with the Aid of Ionic Liquids,” ACS Sustain. Chem. Eng., vol. 7, no. 19, 2019.
[155] M. Cheng, J. Jiang, J. Wang, and J. Fan, “Highly Salt Resistant Polymer Supported Ionic Liquid Adsorbent for Ultrahigh Capacity Removal of p-Nitrophenol from Water,” ACS Sustain. Chem. Eng., vol. 7, no. 9, pp. 8195–8205, 2019.
[156] C. Bin Zhou and D. S. Zhan, “Extraction of Re(VII) from Hydrochloric Acid Solution with TiOA in Hydrophobic Ionic Liquid,” J. Chem. Eng. Data, vol. 64, no. 3, pp. 1014–1019, 2019.
[157] Z. Zhu et al., “Liquid Liquid Equilibrium Data for the Separation of Acetone from n-Heptane Using Four Imidazolium-Based Ionic Liquids,” J. Chem. Eng. Data, vol. 64, no. 3, pp. 1202–1208, 2019.
[158] X. Meng, X. Liu, J. Gao, D. Xu, L. Zhang, and Y. Wang, “Liquid-Liquid Equilibrium of Isobutyl Acetate + Isobutyl Alcohol + Imidazolium-Based Ionic Liquids at 298.15 and 308.15 K,” J. Chem. Eng. Data, vol. 64, no. 2, pp. 778–783, 2019.
[159] X. Yang and Y. Fang, “A Volumetric and Viscosity Study for the Binary Mixtures of Ammonium-Based Asymmetrical Gemini Ionic Liquids with Alcohols at T = 293.15-333.15 K,” J. Chem. Eng. Data, vol. 64, no. 2, pp. 722–735, 2019.
[160] Y. Chen, L. Sun, Z. Lu, Z. Liu, Y. Jiang, and K. Zhuo, “Preparation of nitrogen and sulfur co-doped graphene aerogel with hierarchical porous structure using ionic liquid precursor for high-performance supercapacitor,” Ionics (Kiel)., vol. 25, no. 6, pp. 2781–2789, 2019.
[161] X. Chen et al., “Electrodeposition of alginate–MnO2–C composite film on the carbon ionic liquid electrode for the direct electrochemistry and electrocatalysis of myoglobin,” Polym. Bull., vol. 76, no. 8, pp. 3971–3987, 2019.
[162] X. Wang and Z. Wang, “Enhanced iodine uptake in ionic liquid by biomass, solvents, or supported materials,” Int. J. Environ. Sci. Technol., vol. 16, no. 7, pp. 3317–3324, 2019.
[163] P. Xu, X. L. Wu, X. X. Guo, J. Tang, M. H. Zong, and W. Y. Lou, “Double-Chitinase Hydrolysis of Crab Shell Chitin Pretreated by Ionic Liquid to Generate Chito-Oligosaccharide,” ACS Sustain. Chem. Eng., vol. 7, no. 1, pp. 1683–1691, 2019.
[164] Q. Zeng, H. Qin, H. Cheng, L. Chen, and Z. Qi, “Development of a reactive extraction process for isobutyl isobutyrate formation intensified by bifunctional ionic liquid,” Chem. Eng. Sci. X, vol. 1, p. 100001, 2019.
[165] J. Gao, S. Xin, L. Wang, Y. Lei, H. Ji, and S. Liu, “Effect of ionic liquid/inorganic salt/water pretreatment on the composition, structure and enzymatic hydrolysis of rice straw,” Bioresour. Technol. Reports, vol. 5, no. May 2018, pp. 355–358, 2019.
[166] X. Jin, H. Yu, and Y. Ma, “Reversed-phase ion-pair chromatography of hydroxyl functionalized imidazolium ionic liquid cations and its application in analysis of environmental water and measurement of hydrophobicity constants,” Microchem. J., vol. 145, no. July 2018, pp. 988–995, 2019.
[167] M. Du, Y. Meng, C. Wang, C. Duan, F. Zhu, and Y. Zhang, “A simple synthesis of nitrogen-sulfur co-doped porous carbon using ionic liquids as dopant for high rate performance Li-ion batteries,” J. Electroanal. Chem., vol. 834, no. December 2018, pp. 17–25, 2019.
[168] K. Wu, X. Zhou, X. Wu, B. Lv, G. Jing, and Z. Zhou, “Understanding the corrosion behavior of carbon steel in amino-functionalized ionic liquids for CO2 capture assisted by weight loss and electrochemical techniques,” Int. J. Greenh. Gas Control, vol. 83, no. January, pp. 216–227, 2019.
[169] Q. Dou, C. Lian, S. Lei, J. Chen, H. Liu, and X. Yan, “Silica-grafted ionic liquid for maximizing the operational voltage of electrical double-layer capacitors,” Energy Storage Mater., vol. 18, no. March 2018, pp. 253–259, 2019.
[170] J. Yang et al., “Ionic liquid–activated wearable electronics,” Mater. Today Phys., vol. 8, pp. 78–85, 2019.
[171] L. Hao et al., “Polyoxometalate-based ionic liquid catalyst with unprecedented activity and selectivity for oxidative desulfurization of diesel in [Omim]BF 4,” Chem. Eng. J., vol. 358, no. July 2018, pp. 419–426, 2019.
[172] J. Zhao et al., “Supported ionic liquid-palladium catalyst for the highly effective hydrochlorination of acetylene,” Chem. Eng. J., vol. 360, no. November 2017, pp. 38–46, 2019.
[173] H. Fang et al., “A novel high-strength poly(ionic liquid)/PVA hydrogel dressing for antibacterial applications,” Chem. Eng. J., vol. 365, no. January, pp. 153–164, 2019.
[174] W. Zhang et al., “Electrosynthesized alkyl-modified poly(3,4‑propylenedioxyselenophene) with superior electrochromic performances in an ionic liquid,” J. Electroanal. Chem., vol. 833, no. November 2018, pp. 17–25, 2019.
[175] H. Lyu, Y. Ling, J. Fan, Y. Chen, Y. Yu, and Z. Xie, “Preparation of ionic liquid-functionalized layered double hydroxide via thiol-ene click chemistry for highly efficient removal of azo dyes during broad pH range,” J. Clean. Prod., vol. 211, pp. 1026–1033, 2019.
[176] L. qun Jiang, A. qing Zheng, J. guang Meng, X. bo Wang, Z. li Zhao, and H. bin Li, “A comparative investigation of fast pyrolysis with enzymatic hydrolysis for fermentable sugars production from cellulose,” Bioresour. Technol., vol. 274, no. November 2018, pp. 281–286, 2019.
[177] G. Sang et al., “Electromagnetic interference shielding performance of polyurethane composites: A comparative study of GNs-IL/Fe 3 O 4 and MWCNTs-IL/Fe 3 O 4 hybrid fillers,” Compos. Part B Eng., vol. 164, no. January, pp. 467–475, 2019.
[178] Z. Sun, S. Du, D. Zhang, and W. Song, “Influence of pH and loading of PANI on electrochemical and electromechanical properties for high-performance renewable soft actuator with nano-biocomposite electrode,” React. Funct. Polym., vol. 139, pp. 102–111, 2019.
[179] L. Wang, G. Jin, and Y. Xu, “Desulfurization of coal using four ionic liquids with [HSO 4 ] −,” Fuel, vol. 236, no. July 2018, pp. 1181–1190, 2019.
[180] J. Deng, Z. J. Bai, Y. Xiao, C. M. Shu, and B. Laiwang, “Effects of imidazole ionic liquid on macroparameters and microstructure of bituminous coal during low-temperature oxidation,” Fuel, vol. 246, no. December 2018, pp. 160–168, 2019.
[181] W. Bai, Y. Dai, X. Pan, Z. Zhu, Y. Wang, and J. Gao, “Liquid-liquid equilibria for azeotropic mixture of methyl tert-butyl ether and methanol with ionic liquids at different temperatures,” J. Chem. Thermodyn., vol. 132, pp. 76–82, 2019.
[182] X. Song, L. Ding, L. Wang, M. He, and X. Han, “Polybenzimidazole membranes embedded with ionic liquids for use in high proton selectivity vanadium redox flow batteries,” Electrochim. Acta, vol. 295, pp. 1034–1043, 2019.
[183] Z. Chen, Z. Li, X. Ma, L. Xu, Y. Wang, and S. Zhang, “Aqueous-phase green synthesis of formate-based ionic liquids and their thermophysical properties,” J. Mol. Liq., vol. 279, pp. 370–377, 2019.
[184] A. Bahader et al., “Impact of ionic liquid’s self-assembly on the crystallization behavior of poly (vinylidene fluoride),” J. Mol. Liq., vol. 276, pp. 115–119, 2019.
[185] J. Gao, D. Xu, X. Cha, Z. Cui, L. Zhang, and Y. Wang, “Multiscale modeling and liquid-liquid equilibria insights for the extraction of heterocyclic nitrogen compounds from coal tar via [emim][TOS] as extractant,” J. Mol. Liq., vol. 277, pp. 825–832, 2019.
[186] J. Lei et al., “The dilational rheology and splashing behavior of ionic liquid-type imidazolium Gemini surfactant solutions: Impact of alkyl chain length,” J. Mol. Liq., vol. 283, pp. 725–735, 2019.
[187] Y. Hao, Y. Cui, J. Peng, N. Zhao, S. Li, and M. Zhai, “Preparation of graphene oxide/cellulose composites in ionic liquid for Ce (III) removal,” Carbohydr. Polym., vol. 208, no. December 2018, pp. 269–275, 2019.
[188] H. Dai et al., “Green pH/magnetic sensitive hydrogels based on pineapple peel cellulose and polyvinyl alcohol: synthesis, characterization and naringin prolonged release,” Carbohydr. Polym., vol. 209, no. 381, pp. 51–61, 2019.
[189] C. Liu, G. Ruan, P. Wang, Y. Zhou, P. Xu, and Y. Ding, “Synergistic effect of ILs modified MWCNTs on enhanced dielectric properties of silicone rubber/POE blends,” Mater. Lett., vol. 239, pp. 203–206, 2019.
[190] D. Li et al., “MD and DSC study of bioactive structural stability of insulin in various imidazolium ionic liquids,” J. Mol. Liq., vol. 277, pp. 971–976, 2019.
[191] H. Wang, J. Cui, H. Li, Y. Zhao, and J. Wang, “The effect of cationic structure of ionic liquids on their interactions with 5-hydroxymethylfurfural,” J. Mol. Struct., vol. 1179, pp. 57–64, 2019.
[192] Y. Li, Y. Ji, B. Ren, L. Jia, G. Ma, and X. Liu, “Carboxyl-functionalized mesoporous molecular sieve/colloidal gold modified nano-carbon ionic liquid paste electrode for electrochemical determination of serotonin,” Mater. Res. Bull., vol. 109, no. July 2018, pp. 240–245, 2019.
[193] S. He et al., “A direct ‘touch’ approach for gold nanoflowers decoration on graphene/ionic liquid composite modified electrode with good properties for sensing bisphenol A,” Talanta, vol. 191, no. August 2018, pp. 400–408, 2019.
[194] H. Lyu, J. Fan, Y. Ling, Y. Yu, and Z. Xie, “Functionalized cross-linked chitosan with ionic liquid and highly efficient removal of azo dyes from aqueous solution,” Int. J. Biol. Macromol., vol. 126, pp. 1023–1029, 2019.
[195] Y. Zhao, Y. Chen, M. Fang, H. Zhang, and K. Zhuo, “Volumetric and viscosity properties of glycine in ionic liquid + water solutions at 298.15 K,” J. Chem. Thermodyn., vol. 130, pp. 198–203, 2019.
[196] H. Wang et al., “Vortex-assisted deep eutectic solvent reversed-phase liquid–liquid microextraction of triazine herbicides in edible vegetable oils,” J. Chromatogr. A, vol. 1589, pp. 10–17, 2019.
[197] P. Sun, K. Huang, and H. Liu, “The nature of salt effect in enhancing the extraction of rare earths by non-functional ionic liquids: Synergism of salt anion complexation and Hofmeister bias,” J. Colloid Interface Sci., vol. 539, pp. 214–222, 2019.
[198] Y. Ma, Z. Li, H. Wang, and H. Li, “Synthesis and optimization of polyurethane microcapsules containing [BMIm]PF 6 ionic liquid lubricant,” J. Colloid Interface Sci., vol. 534, pp. 469–479, 2019.
[199] Y. Yan et al., “Ionic liquid induced electrostatic self-assemble of reduced graphene oxide for high-performance all-solid-state flexible symmetric supercapacitor,” J. Alloys Compd., vol. 776, pp. 22–30, 2019.
[200] J. Zhang, J. Sun, Y. Hu, D. Wang, and Y. Cui, “Electrochemical capacitive properties of all-solid-state supercapacitors based on ternary MoS2/CNTs-MnO2 hybrids and ionic mixture electrolyte,” J. Alloys Compd., vol. 780, pp. 276–283, 2019.
[201] L. Ma, D. Wang, W. Kang, H. Xin, and G. Dou, “Comparison of the staged inhibitory effects of two ionic liquids on spontaneous combustion of coal based on in situ FTIR and micro-calorimetric kinetic analyses,” Process Saf. Environ. Prot., vol. 121, pp. 326–337, 2019.
[202] P. Wang et al., “Liquid-liquid measurement and correlation for separation of azeotrope (dimethyl carbonate and ethanol) with different imidazolium-based ionic liquids,” Fluid Phase Equilib., vol. 485, pp. 183–189, 2019.
[203] J. Di et al., “Isobaric vapor-liquid equilibria for tert-butanol + water with single and mixed ionic liquids as solvents at 101.3 kPa,” Fluid Phase Equilib., vol. 490, pp. 68–76, 2019.
[204] J. Lang, X. Zhang, L. Liu, B. Yang, J. Yang, and X. Yan, “Highly enhanced energy density of supercapacitors at extremely low temperatures,” J. Power Sources, vol. 423, no. July 2018, pp. 271–279, 2019.
[205] Z. Sun, L. Yang, D. Zhang, and W. Song, “High performance, flexible and renewable nano-biocomposite artificial muscle based on mesoporous cellulose/ ionic liquid electrolyte membrane,” Sensors Actuators, B Chem., vol. 283, no. December 2018, pp. 579–589, 2019.
[206] X. Zheng, F. Chen, X. Zhang, H. Zhang, Y. Li, and J. Li, “Ionic liquid grafted polyamide 6 as porous membrane materials: Enhanced water flux and heavy metal adsorption,” Appl. Surf. Sci., vol. 481, no. December 2018, pp. 1435–1441, 2019.
[207] X. Wen, F. Yuwen, Z. Ding, W. Zhang, R. Yao, and J. Lu, “Electric arc-induced damage on electroless Ag film using ionic liquid as a lubricant under sliding electrical contact,” Tribol. Int., vol. 135, no. January, pp. 269–276, 2019.
[208] G. yaohua, X. ping, J. feng, and S. keren, “Co-immobilization of laccase and ABTS onto novel dual-functionalized cellulose beads for highly improved biodegradation of indole,” J. Hazard. Mater., vol. 365, no. November 2018, pp. 118–124, 2019.
[209] X. Zhang, S. Yu, Q. Zhu, and L. Zhao, “Enhanced anhydrous proton conductivity of SPEEK/IL composite membrane embedded with amino functionalized mesoporous silica,” Int. J. Hydrogen Energy, vol. 44, no. 12, pp. 6148–6159, 2019.
[210] J. Deng, Z. J. Bai, Y. Xiao, B. Laiwang, C. M. Shu, and C. P. Wang, “Thermogravimetric analysis of the effects of four ionic liquids on the combustion characteristics and kinetics of weak caking coal,” J. Mol. Liq., vol. 277, pp. 876–885, 2019.
[211] X. Geng et al., “Ternary liquid-liquid equilibrium of methanol + isopropyl acetate/methyl methacrylate + 1-methylmidazole hydrogen sulfate at different temperatures and 1 atm,” J. Mol. Liq., vol. 283, pp. 515–521, 2019.
[212] P. Xie, X. Zhou, and L. Zheng, “Stereoselective synthesis of a key chiral intermediate of (S)-Rivastigmine by AKR-GDH recombinant whole cells,” J. Biotechnol., vol. 289, no. November 2018, pp. 64–70, 2019.
[213] F. Jiang, C. Pan, Y. Zhang, and Y. Fang, “Cellulose graft copolymers toward strong thermoplastic elastomers via RAFT polymerization,” Appl. Surf. Sci., vol. 480, no. January, pp. 162–171, 2019.
[214] X. Lu, J. Zhu, X. Qian, and J. Ji, “Separation of methyl linolenate and its analogues by functional mixture of imidazolium based ionic liquid-organic solvent-cuprous salt,” Chinese J. Chem. Eng., vol. 27, no. 4, pp. 811–817, 2019.
[215] F. Li, M. Gao, and B. Guo, “Friction and lubrication mechanism of a new type of anti-magnetic bearing Ti60 titanium alloy material,” Results Phys., vol. 14, no. November, pp. 0–1, 2019.
[216] L. Li, H. Li, B. Yan, S. Yu, and X. Ge, “Preparation and properties of porous gels from poly(l-lactic acid) and poly(d-lactic acid) with ionic liquids as solvents and porogens,” J. Appl. Polym. Sci., vol. 136, no. 7, pp. 1–9, 2019.
[217] Y. Cui, J. Zhang, C. Jin, Y. Liu, W. Luo, and W. Zheng, “Ionic Liquid-Controlled Growth of NiCo2S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors,” Small, vol. 15, no. 3, pp. 1–10, 2019.
[218] L. Wang, Z. Li, G. Jin, N. Zuo, and Y. Xu, “Effort of ionic liquids with [HSO4]- on oxidative desulphurization of coal,” Can. J. Chem. Eng., vol. 97, no. S1, pp. 1299–1306, 2019.
[219] B. Wang et al., “Carbon with Surface-Enriched Nitrogen and Sulfur Supported Au Catalysts for Acetylene Hydrochlorination,” ChemCatChem, vol. 11, no. 3, pp. 1002–1009, 2019.
[220] Y. Y. Hong et al., “Improved enzymatic hydrolysis and ethanol production by combined alkaline peroxide and ionic liquid-water mixtures pretreatment of rice straw,” J. Chem. Technol. Biotechnol., vol. 94, no. 5, pp. 1451–1459, 2019.